| Applications: | Pneumatic instrumentation circuits, lubricant and cooling lines. | Used With: | Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing. |
|---|---|---|---|
| SAE Rating: | N/A | Conformance: | N/A |
| Vibration: | Excellent Resistance. | Temperature Range: | Depends on tubing used. -65°F to +250°F (-53°C to +121°C) with brass sleeve -40°F to +150°F (-40°C to +66°C) with plastic sleeve. (Refer to tubing temperature range.) |
| Tolerance: | +/- .02 on all dimensions. | Lead Free: | Not Lead Free |
- Up to 150 PSI from 0°F to + 150°F with thermoplastic tubing. Up to 300 PSI from 0°F to + 175°F with soft metal tubing.
- 1/8″, 3/16″ O.D. — no limitation
- 1/4″ O.D.–.035 5/16″, 3/8″,1/2″ O.D.–.049
- 1) Cut tubing to desired length.
- 2) Slide nut/sleeve assembly on tube. Threaded end “A” of nut must face toward fitting.
- 3) Bottom tubing into fitting.
- 4) Plastic sleeve – Tighten nut hand tight.
Brass Sleeve – Tighten nut hand tight, then an additional 3/4 turn.
| Tube OD | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
|---|---|---|---|---|---|---|
| Thread Size – B | 5/16-24 | 3/8-24 | 3/8-24 | 7/16-24 | 1/2-24 | 11/16-20 |
**Note: 1/8 and 3/16 sizes have brass sleeves**
| Crossover Series: | ||||
|---|---|---|---|---|
| MP62 | 262PF | 1262 | 62P | 262P |
| Part Number | Tube O.D | A | Hex | Approx. Weight (Lbs.) |
|---|---|---|---|---|
| 20240 (20-240) |
1/8″ | 0.66″ | 0.31″ | 0.02 |
| 20241 (20-241) |
3/16″ | 0.75″ | 0.37″ | 0.04 |
| 20242 (20-242) |
1/4″ | 0.69″ | 0.37″ | 0.04 |
| 20243 (20-243) |
5/16″ | 0.69″ | 0.44″ | 0.04 |
| 20244 (20-244) |
3/8″ | 0.72″ | 0.50″ | 0.10 |
| 20200 (20-200) |
3/8″ x 1/4″ | 0.72″ | 0.50″ | 0.08 |
| 20245 (20-245) |
1/2″ | 0.84″ | 0.69″ | 0.14 |
Dimension data can change without notice.
Reviews
There are no reviews yet.