| Compatibility & Interchange: |
- Foster 3, 4, 5 and 6 Series
- Parker 20-Series Manual Interchange
- Hansen 1000, 400 and 500
|
| Construction: |
- Machined components are manufactured using solid bar stock.
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
- Nitrile (Nitrile Rubber) seals are standard.
- Steel componentry is plated using ROHS Compliant Trivalent Chrome.
- Steel sleeve and steel tubular valve.
|
| Safety Notes: |
- It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18″ long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
- Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer’s catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
- Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
|
| Additional Information: |
- For a selection guide, cross reference tables, safety info, fluid compatibility, and other general info, please see: Dixon Valve Quick Disconnect Guide.PDF
|
| F-Series | Manual Industrial Interchange Coupler (Push-Loc Barb) |
|
Part
Number |
Coupling
Type |
Body
Size |
Hose I.D. |
Material |
Length |
Max.
OD |
Hex |
Max. Working
Pressure |
Burst
Pressure |
Brass Coupler
& Brass Plug: |
Brass Coupler
& Steel Plug: |
Brass Coupler
& Brass Plug: |
Brass Coupler
& Steel Plug: |
| 2FB2-B |
Socket/Female |
1/4″ |
1/4″ |
Brass |
2.49″
(63.2mm) |
0.88″
(22.4mm) |
3/4″ |
300 PSI
(20 bar) |
500 PSI
(35 bar) |
8,500 PSI
(586 bar) |
9,000 PSI
(620 bar) |
| 2FB3-B |
Socket/Female |
1/4″ |
3/8″ |
Brass |
2.49″
(63.2mm) |
0.88″
(22.4mm) |
3/4″ |
300 PSI
(20 bar) |
500 PSI
(35 bar) |
8,500 PSI
(586 bar) |
9,000 PSI
(620 bar) |
| 3FB2 |
Socket/Female |
3/8″ |
1/4″ |
Steel |
2.80″
(71.1mm) |
1.06″
(26.9mm) |
7/8″ |
Steel Coupler & Steel Plug: 500 PSI
(35 bar) |
Steel Coupler & Steel Plug: 19,500 PSI
(1,345 bar) |
| 3FB3 |
Socket/Female |
3/8″ |
3/8″ |
Steel |
2.80″
(71.1mm) |
1.06″
(26.9mm) |
7/8″ |
Steel Coupler & Steel Plug: 500 PSI
(35 bar) |
Steel Coupler & Steel Plug: 19,500 PSI
(1,345 bar) |
| 3FB4 |
Socket/Female |
3/8″ |
1/2″ |
Steel |
2.80″
(71.1mm) |
1.06″
(26.9mm) |
7/8″ |
Steel Coupler & Steel Plug: 500 PSI
(35 bar) |
Steel Coupler & Steel Plug: 19,500 PSI
(1,345 bar) |
| 4FB3** |
Socket/Female |
1/2″ |
3/8″ |
Steel |
3.40″
(86.4mm) |
1.19″
(30.2mm) |
1″ |
Steel Coupler & Steel Plug: 500 PSI
(35 bar) |
Steel Coupler & Steel Plug: 15,500 PSI
(1,070 bar) |
| 4FB4** |
Socket/Female |
1/2″ |
1/2″ |
Steel |
3.40″
(86.4mm) |
1.19″
(30.2mm) |
1″ |
Steel Coupler & Steel Plug: 500 PSI
(35 bar) |
Steel Coupler & Steel Plug: 15,500 PSI
(1,070 bar) |
** Can be used with DQC J-series Automotive plugs
| DF-Series | Industrial Interchange Plug (Push-Loc Barb) |
|
| Part Number |
Coupling Type |
Body Size |
Hose I.D. |
Material |
Length |
Maximum OD |
Hex |
Working Pressure / Burst Pressure
when Connected to: |
| D2B2 |
Plug/Male |
1/4″ |
1/4″ |
Steel |
2.09″
(53.1mm) |
0.69″
(17.5mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 16,000 PSI (1,100 bar)
- Brass F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 11,500 PSI (790 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 6,500 PSI (448 bar)
|
| D2B2-B |
Plug/Male |
1/4″ |
1/4″ |
Brass |
2.09″
(53.1mm) |
0.69″
(17.5mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 16,000 PSI (1,100 bar)
- Brass F-Series Manual Couplers: Max. Working: 300 PSI (20 bar) | Burst: 8,500 PSI (586 bar)
|
| D2B3 |
Plug/Male |
1/4″ |
3/8″ |
Steel |
2.09″
(53.1mm) |
0.86″
(21.8mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 16,000 PSI (1,100 bar)
- Brass F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 11,500 PSI (790 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 6,500 PSI (448 bar)
|
| D3B2 |
Plug/Male |
3/8″ |
1/4″ |
Steel |
2.21″
(56.1mm) |
0.75″
(19.1mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 15,500 PSI (1,070 bar)
- Brass F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 11,500 PSI (790 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 19,500 PSI (1,345 bar)
|
| D3B3 |
Plug/Male |
3/8″ |
3/8″ |
Steel |
2.21″
(56.1mm) |
0.75″
(19.1mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 15,500 PSI (1,070 bar)
- Brass F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 11,500 PSI (790 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 19,500 PSI (1,345 bar)
|
| D3B4 |
Plug/Male |
3/8″ |
1/2″ |
Steel |
2.35″
(59.7mm) |
0.75″
(19.1mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 15,500 PSI (1,070 bar)
- Brass F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 11,500 PSI (790 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 19,500 PSI (1,345 bar)
|
| D4B4 |
Plug/Male |
1/2″ |
1/2″ |
Steel |
2.67″
(67.8mm) |
0.75″
(19.1mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 14,000 PSI (965 bar)
- Steel F-Series Manual Couplers: Max. Working: 500 PSI (35 bar) | Burst: 15,500 PSI (1,070 bar)
|
| D6B6 |
Plug/Male |
3/4″ |
3/4″ |
Steel |
2.99″
(75.9mm) |
1.00″
(25.4mm) |
– |
- Brass D-Series Automatic Couplers: Max. Working: 500 PSI (35 bar) | Burst: 10,000 PSI (670 bar)
|
Reviews
There are no reviews yet.