| Overview: |
- Can be used on both hot side or cold side of the Charge-Air Cooler system.
- Note: Flexfab recommends double clamping at each end for proper installation.
|
| Construction: |
- 6-Ply Silicone Coated Meta-Aramid Fabric with Stainless Steel Pressure Retention Rings
|
| Specifications: |
- Temperature range is -65°F (-54°C) to +500°F (+260°C)
- Wall thickness is .138″/.198″
|
| Applications: |
- Used on diesel engines to deliver pressurized intake air to the charge air intercooler and intake manifold
|
| Part Number |
Inside Diameter |
Outside Diameter |
Overall Length |
Convolutes (Humps) |
Stainless Steel Rings |
Maximum OperatingPressure – PSI |
WeightLBS |
Clamp |
| 7968 |
6.00″ |
6.34″ |
8.00″ |
2 |
3 |
50 PSI |
1.42 lbs |
FLX2584-0662 |
| 7969 |
7.00″ |
7.34″ |
8.00″ |
2 |
3 |
40 PSI |
1.68 lbs |
FLX2584-0762 |
| 7970 |
8.00″ |
8.34″ |
8.00″ |
2 |
3 |
40 PSI |
1.92 lbs |
FLX2584-0862 |
*Specifications for reference only. Specific test data available on request.
Reviews
There are no reviews yet.