Name: 40X3 by Danfoss | SAE 45° Flare Cap | 3/16 " Tube OD | Brass
SKU: G_84279_1476959567908
Availability: InStock

40X3 by Danfoss | SAE 45° Flare Cap | 3/16 ” Tube OD | Brass

Guaranteed Safe Checkout

Overview:
Danfoss brass tube fittings are made from high quality UNS CA-360 brass bar, and are precision machined to meet SAE standards and specifications.
Applications:
LP and natural gas, flammable liquids (special order), instrumentation, refrigeration, power steering, hydraulic and pneumatic systems.
Advantages:
Low cost and reusability. Long or short nut. Good vibration resistance – use long nut when greater vibration resistance is required.
Used With:
Copper, brass, aluminum and steel hydraulic tubing that can be flared.
Pressure:
Working pressure up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing – up to 5000 psi with bundyweld (double flared) and 3500 psi with copper tubing, depending on size.
Temperature Range:
-65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
Conformance:
Listed by Underwriter’s Laboratories (available on special order) for flammable liquids, refrigeration and gas. Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).

Tube OD	1/8″	3/16″	1/4″	5/16″	3/8″	7/16″	1/2″	5/8″	3/4″
Thread Size	5/16-24	3/8-24	7/16-20	1/2-20	5/8-18	11/16-18	3/4-16	7/8-14	1-1/16-14

Reviews

There are no reviews yet.

Be the first to review “40X3 by Danfoss | SAE 45° Flare Cap | 3/16 ” Tube OD | Brass”

40X3 by Danfoss | SAE 45° Flare Cap | 3/16 ” Tube OD | Brass