Precision molded seals form a “bubble tight” seal for reliable operation within rated working pressures. Nitrile (Buna-N) seals are standard. EPDM, Viton and Neoprene seals are available as options.
Proven ball locking mechanism with large numbers of stainless steel locking balls evenly distribute the load to resist wear and provide positive connections and allow a swiveling action to reduce hose torque.
Integral sleeve guard protects the sleeve and resists accidental disconnects for the “SG” series.
Knurling and/or grooves on the sleeve provide a gripping surface for ease of operation.
Wide range of body sizes, materials, options and end terminations are available to meet specific needs.
Accepts Industrial Interchange Plug.
Operation: Sleeve type couplings are widely used to connect air and low pressure fluid lines. Their compact and economical design uses a ball locking mechanism consisting of captive stainless steel balls that engage the locking groove on the mating plug. The sliding spring loaded sleeve on the socket must be manually retracted in order to connect or disconnect the plug.
Working Pressure: 300 PSIG; vacuum to 26″ Hg
Interchangeability: Complies with ANSI/NFPA T3.20.14-1990 & IS0 6150-B
Specifications
Body Size
1/4″
3/8″
1/2″
Rated Pressure (psi)
300
300
300
Temp. Range (Buna-N Seal)
-40 deg. to +250 deg. F
Locking Device
Stainless Steel Balls
Vacuum Data (inches Hg)
— Disconnected (coupler only)
Not Recommended
— Connected
27.4
27.4
27.4
Approximate CFM at 100 (psi)
37
70
150
Female Coupler Part Number
Brand
Male Plug Part Number
Size
Description
5605
Foster
–
1/4″
Brass/Steel
D542
Breco
–
1/4″
Brass/Steel
BL5605
Foster
–
1/4″
Ball Lock, Brass/Steel
D542BL
Breco
–
1/4″
Brass/Steel with Ball Lock
5705
Foster
59-5
3/8″
Brass/Steel
D562
Breco
B-B4S3-S
3/8″
Brass/Steel
BL5705
Foster
–
3/8″
Ball Lock, Brass/Steel
D562BL
Breco
–
3/8″
Brass/Steel with Ball Lock
5705H
Foster
–
3/8″
For Heat, Viton Seal
5805
Foster
60-5 60-5G
1/2″
Brass/Steel
D582
Breco
B-B4S4-S
1/2″
Brass/Steel
BL5805
Foster
–
1/2″
Ball Lock, Brass/Steel
D582BL
Breco
–
1/2″
Brass/Steel with Ball Lock
5805H
Foster
–
1/2″
For Heat, Viton Seal
5805HW
Foster
–
1/2″
For Hot Water, Brass/SS, Viton Seal
5805W
Foster
–
1/2″
For Water, Brass/SS, Buna-N Seal
5905
Foster
61-5
3/4″
Brass/Steel
D5122
Breco
B-B4S6-S
3/4″
Brass/Steel
BL5905
Foster
–
3/4″
Brass/Steel
D5122BL
Breco
–
3/4″
Brass/Steel with Ball Lock
5905W
Foster
–
3/4″
Brass/Steel
Requires Hose Clamps
Reviews
There are no reviews yet.
Be the first to review “5705H by ZSi-Foster | 1-Way Quick Disconnect Socket | Hose Stem | For Heat | Viton Seal | 3/8 ” ID” Cancel reply
Reviews
There are no reviews yet.