| Features: |
- No hose clamps or ferrules are needed for installation.
|
| Material: |
- Plated Steel
- Yellow Plastic Cap (Part numbers that end with CBC have Brass Caps.)
|
| Specifications: |
- Temperature Range: -40 to +150°F
- Pressure Rating: 350 PSI
|
| Safety Notes: |
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
|
| Installation: |
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
- Disassembly Instructions:
- 1. Leaving push-on fitting in place, make a 1″ cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
|
| Part Number |
Previous
Part Number |
Hose I.D. |
Tube O.D. |
Female UNF |
| 2890407C** |
289-0407 |
1/4″ |
1/4″ |
7/16″-20 |
| 2890407CSAE* |
289-0407SAE |
1/4″ |
1/4″ |
7/16″-20 |
| 2890609C** |
289-0609 |
3/8″ |
3/8″ |
9/16″-18 |
| 2890610CSAE* |
289-0610SAE |
3/8″ |
3/8″ |
5/8″-18 |
| 2890812C** |
289-0812 |
1/2 |
1/2″ |
3/4″-16 |
| 2891217C** |
289-1217 |
3/4″ |
3/4″ |
1-1/16″-12*** |
* Notch in nut for SAE identification
** JIC only, may substitute dual angle
*** UN Thread
Reviews
There are no reviews yet.