| Note: |
- Pressure: Determined by maximum working pressure for hose size.
- CAUTION: Sealing integrity may be damaged by the use of clamps.
- Label Set: FS-500
|
| Material: |
|
|
| Compatible Hose: |
|
|
| Assembly instructions: |
- To determine the correct length of hose, subtract the cut-off factor for each end Fitting from the overall length of assembly.
- 1. Lubricate insert.
- 2. Hold hose at angle as shown and push on and up over first barb.
- 3. Continue to push straight on until hose is seated under protective plastic cap. (Keep hand back from hose end area so that hose can expand.)
- Assembly Lubricant:
- 1 Gallon: 222070-8
- 1 Pint: 222070
|
| Disassembly instructions: |
- 1. Split hose as shown. Do not cut completely through hose. Sealing edge of barb could be damaged.
- 2. Bend hose and remove with quick pull.
|
|
Brass
Part Number |
Hose
I.D. |
Pipe
Size |
Thread Size |
A |
B |
Hose Cut-off
Factor |
Hole
Diameter |
Square
E |
| 10005B-C02 |
5/16 “ |
1/8″ |
1/8-27 |
1.11″ |
0.94″ |
0.31″ |
0.228″ |
1/2″ |
| 10005B-C04 |
5/16″ |
1/4″ |
1/4-18 |
1.18″ |
0.94″ |
0.38″ |
0.228″ |
9/16″ |
| 10006B-C02 |
3/8″ |
1/8″ |
1/8-27 |
1.17″ |
0.94″ |
0.38″ |
0.297″ |
1/2″ |
| 10006B-C04 |
3/8″ |
1/4″ |
1/4-18 |
1.24″ |
0.94″ |
0.38″ |
0.297″ |
9/16″ |
Note: Drawings may differ from actual parts.
Reviews
There are no reviews yet.