| Features: |
- Aluminum and unplated iron flanges are flat face.
- Stainless steel flanges are raised face.
- Reference dixonvalve.com for flange bolt hole drilling circle standards.
- Flanges are designed to mate with 150# flanges.
- Flanges have the same bolt hole pattern as an ANSI 150 lb. flange, the thickness may vary.
|
| Safety Notes: |
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
- Pressure rating is based on the seal of the mating part.
|
| How It Works: |
- To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
- Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
|
| Specifications: |
- Produced to interchange with all product produced to Commercial Item Description A-A-59326D.
|
| Part Number |
Material |
Size |
Flange Thickness |
Max. Operating Pressure |
| 200-AL-AL |
356T6 Aluminum |
2″ |
3/4″ |
250 PSI |
| 300-AL-AL |
356T6 Aluminum |
3″ |
5/8″ |
125 PSI |
| 400-AL-AL |
356T6 Aluminum |
4″ |
5/8″ |
100 PSI |
| 600-AL-AL |
356T6 Aluminum |
6″ |
5/8″ |
75 PSI |
| 800-AL-AL* |
356T6 Aluminum |
8″ |
1-1/8″ |
50 PSI |
| |
| 300-AL-MI |
Unplated Malleable Iron |
3″ |
5/8″ |
125 PSI |
| |
| 100-AL-SS |
316 Stainless Steel |
1″ |
9/16″ |
250 PSI |
| 150-AL-SS |
316 Stainless Steel |
1-1/2″ |
11/16″ |
250 PSI |
| 200-AL-SS |
316 Stainless Steel |
2″ |
7/16″ |
250 PSI |
| 300-AL-SS |
316 Stainless Steel |
3″ |
7/16″ |
125 PSI |
| 400-AL-SS |
316 Stainless Steel |
4″ |
7/16″ |
100 PSI |
| 600-AL-SS |
316 Stainless Steel |
6″ |
5/8″ |
75 PSI |
* Part is produced as a welded fabrication.
Reviews
There are no reviews yet.