| Hose Properties: | |||
|---|---|---|---|
| Application: | High abrasion applications. Hydraulic system service with petroleum and water-based fluids. For general industrial service. |
SAE Rating: | Meets or exceeds: SAE 100R16 Type S, EN 857 2SC, ISO 18752, ISO 11237-1 Type 2SC performance |
| Other Ratings: | N/A | Tube: | Synthetic Rubber |
| Reinforcement: | Double Wire Braid | Cover: | Synthetic Rubber Intermediate Cover and BRUISER™ Outer Cover |
| Temperature Range: | -40°F to +260°F (-40°C to +126°C) |
| Part Number | Hose ID | Nominal Hose OD | Max. Operating Pressure | Min. Burst Pressure | Min. Bend Radius | Weight | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | mm | in | mm | in | bar | psi | bar | psi | mm | in | kg/m | lbs/ft | |
| FC735-04* | 6 | 6,4mm | 0.25″ | 14,1mm | 0.55″ | 448 bar | 5800* psi | 1600,0 bar | 23200* psi | 50,8mm | 2.00″ | 0,31 kg/m | 0.21 lbs/ft |
| FC735-6 | 10 | 9,5mm | 0.38″ | 17,4mm | 0.69″ | 400 bar | 5300 psi | 1462,0 bar | 21200 psi | 63,5mm | 2.50″ | 0,42 kg/m | 0.28 lbs/ft |
| FC735-8 | 12 | 12,7mm | 0.50″ | 20,8mm | 0.82″ | 345 bar | 4275 psi | 1180,0 bar | 17100 psi | 88,9mm | 3.50″ | 0,49 kg/m | 0.33 lbs/ft |
| FC735-10 | 16 | 15,9mm | 0.62″ | 24,8mm | 0.98″ | 276 bar | 4000 psi | 1103,0 bar | 16000 psi | 101,6mm | 4.00″ | 0,71 kg/m | 0.48 lbs/ft |
| FC735-12 | 19 | 19,1mm | 0.75″ | 28,4mm | 1.12″ | 241 bar | 3125 psi | 860 bar | 12500 psi | 120,7mm | 4.75″ | 0,83 kg/m | 0.56 lbs/ft |
| FC735-16 | 25 | 25,4mm | 1.00″ | 35,7mm | 1.41″ | 207 bar | 2550 psi | 700,0 bar | 10200 psi | 152,4mm | 6.00″ | 1,19 kg/m | 0.80 lbs/ft |
| FC735-20 | 31 | 31,8mm | 1.25″ | 43,3mm | 1.70″ | 172 bar | 2250 psi | 620,0 bar | 9000 psi | 209,6mm | 8.25″ | 1,52 kg/m | 1.02 lbs/ft |
* Meets SAE100R2 pressures.
Bulk / By the Foot: We sell Danfoss hose in “Bulk Length” unless otherwise specified in the title or option selector as “Exact Length”. When you buy “Bulk Length” hose you are agreeing to buy multiple lengths that add up to the length you purchased. If your length can be supplied as a single piece then it will be, but there can be no assurance of this even if you contact us. If you need a single piece then you can select an “Exact Length” option or Contact Us for a quote.
Warning! Danfoss hose and fittings are engineered to match Danfoss Aeroquip hose and fitting tolerances. The use of Danfoss fittings on hose supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Danfoss Corporation, Murdock Industrial Inc., or any other entity. Consult current master catalog for additional warnings and cautions.
Reviews
There are no reviews yet.