| Applications: | Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. | Used With: | Copper, brass, aluminum and steel hydraulic tubing that can be flared. |
|---|---|---|---|
| SAE Rating: | N/A | Conformance: | Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards). |
| Vibration: | Excellent resistance. | Temperature Range: | -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures. |
| Advantages: | Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. | Tolerance: | +/- .03 on all dimensions. |
| Working Pressure Ranges: |
|---|
|
| Assembly Instructions: |
|
| Tube OD | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 7/16″ | 1/2″ | 5/8″ | 3/4″ | 7/8″ | 1″ |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread OD (Threads per inch) |
5/16-28 | 3/8-24 | 7/16-24 | 1/2-20 | 5/8-18 | 11/16-18 | 3/4-18 | 7/8-18 | 1-1/16-16 | 1-3/16-16 | 1-5/16-16 |
| Standard Metric Threads: | |||
|---|---|---|---|
| Description Tube Size |
Thread OD | Crest (Pitch) |
Thread Description |
| Japanese 3/16″ | 10mm | 1.0mm | M10 x 1.0 |
| European 3/16″ | 10mm | 1.0mm | M10 x 1.0 |
| GM 6mm | 12mm | 1.0mm | M12 x 1.0 |
| Fuel 5/16″ | 14mm | 1.5mm | M14 x 1.5 |
| Fuel 3/8″ | 16mm | 1.5mm | M16 x 1.5 |
| Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads. |
| Crossover Series: |
|---|
| 4205 |
| Part Number | Male SAE Flare x Male Inverted Flare | A | Hex | Reference # | Approx. Weight (Lbs.) |
|---|---|---|---|---|---|
| 12250 (12-250) |
1/4″ x 3/16″ | 1.03″ | 0.43″ | 1518 | 0.02 |
| 12252 (12-252) |
1/4″ x 1/4″ | 1.03″ | 0.43″ | 1522 | 0.03 |
| 12254 (12-254) |
3/8″ x 5/16″ | 1.34″ | 0.63″ | 1553 | 0.08 |
| 12256 (12-256) |
3/8″ x 3/8″ | 1.37″ | 0.63″ | 1563 | 0.09 |
| 12257 (12-257) |
3/8″ x 7/16″ | 1.40″ | 0.68″ | 1554 | 0.10 |
Reviews
There are no reviews yet.