Sale!
10449 (10-449) by Midland | SAE 45° Flare Fitting | 1/4 " Male SAE 45° Flare x 1/4 " Male NPTF | 45° Elbow | Brass

10449 (10-449) by Midland | SAE 45° Flare Fitting | 1/4 ” Male SAE 45° Flare x 1/4 ” Male NPTF | 45° Elbow | Brass

Original price was: $2.49.Current price is: $0.75.

- +
SKU: G_40553_14659908632946 Category: Tag:
Guaranteed Safe Checkout
Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: SAE# 010302 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance – use long nut when greater vibration resistance is required. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
54 4945 40945 E145 159F 654F 59FF 254 47
Part Number Male SAE 45° Flare x Male NPTF A B Body Size Approx. Weight
(Lbs.)
10448
(10-448)		 1/4″ x 1/8″ 0.67″ 0.64″ 0.41″ 0.04
10448B*
(10-444B)		 1/4″ x 1/8″ 0.67″ 0.64″ 0.44″ 0.04
10449
(10-449)		 1/4″ x 1/4″ 0.75″ 0.86″ 0.53″ 0.07
10450
(10-450)		 5/16″ x 1/8″ 0.78″ 0.64″ 0.53″ 0.06
10451
(10-451)		 5/16″ x 1/4″ 0.81″ 0.86″ 0.53″ 0.07
10452
(10-452)		 3/8″ x 1/4″ 0.91″ 0.86″ 0.53″ 0.09
10452B*
(10-452B)		 3/8″ x 1/4″ 0.89″ 0.86″ 0.64″ 0.12
10453
(10-453)		 3/8″ x 3/8″ 0.93″ 0.94″ 0.59″ 0.11
10454
(10-454)		 3/8″ x 1/2″ 0.99″ 1.17″ 0.75″ 0.19
10455
(10-455)		 1/2″ x 3/8″ 1.07″ 0.88″ 0.59″ 0.12
10455B*
(10-455B)		 1/2″ x 3/8″ 1.06″ 0.94″ 0.76″ 0.18
10456
(10-456)		 1/2″ x 1/2″ 1.12″ 1.18″ 0.75″ 0.20
10460
(10-460)		 5/8″ x 3/8″ 1.13″ 0.95″ 0.81″ 0.22
10457
(10-457)		 5/8″ x 1/2″ 1.12″ 1.17″ 0.78″ 0.18
10458
(10-458)		 3/4″ x 1/2″ 1.28″ 1.16″ 0.88″ 0.26
10459
(10-459)		 3/4″ x 3/4″ – – – 0.31

Reviews

There are no reviews yet.

Be the first to review “10449 (10-449) by Midland | SAE 45° Flare Fitting | 1/4 ” Male SAE 45° Flare x 1/4 ” Male NPTF | 45° Elbow | Brass”

Your email address will not be published. Required fields are marked *

Related products

Search
Shopping Cart
10449 (10-449) by Midland | SAE 45° Flare Fitting | 1/4 " Male SAE 45° Flare x 1/4 " Male NPTF | 45° Elbow | Brass10449 (10-449) by Midland | SAE 45° Flare Fitting | 1/4 ” Male SAE 45° Flare x 1/4 ” Male NPTF | 45° Elbow | Brass
Original price was: $2.49.Current price is: $0.75.
- +