| Quality: |
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Chrome plated brass ball for longer life
- Handle stops on body to avoid stresses at stem
|
| Body: |
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
|
| Stem: |
- Blowout-proof nickel plated brass stem
- Pure PTFE adjustable packing gland and reinforced washer for lower torque and easy maintenance
- Triple stem seals in sizes over 2″
|
| Sealing: |
- Glass filled pure PTFE self-lubricating seats with flexible-lip design
|
| Threads: |
- NPT taper ANSI B.1.20.1 female by female threads
|
| Flow: |
- Full port to DIN 3357 for maximum flow
|
| Handle: |
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Handle removable with valve in service
|
| Working Pressure & Temperature: |
- Maximum working pressure 600 PSI (CWP)
- Steam rating 150 PSI (WSP)
- -40°F/+350°F
- WARNING: freezing of the fluid in the installation may severely damage the valve
|
| Upon Request: |
- AISI 316 stainless steel ball
- Custom design
- Pure PTFE seals
|
| Approved by or in Compliance with: |
- Canadian standards Association (United States, Canada)
- Factory Mutual (United States)
- GOST-R (Russia)
- Hygiene and epidemic center in Moscow city (Russia)
- RoHS Compliant (EU)
- Underwriters Laboratories (United States & Canada)
- Meeting WW-V-35C Federal U.S. Specification
- NOTE: approvals apply to specific configurations/sizes only.
|
|
| Part Number |
Size |
Dimensions (Inches) |
| D |
DN |
I |
L |
G |
CH |
| S92BF8 |
1/4″ |
1/4″ |
0.314″ |
0.472″ |
1.771″ |
0.885″ |
0.787″ |
| S92CF8 |
3/8″ |
3/8″ |
0.393″ |
0.472″ |
1.771″ |
0.885″ |
0.787″ |
| S92DF8 |
1/2″ |
1/2″ |
0.590″ |
0.610″ |
2.332″ |
1.161″ |
0.984″ |
| S92EF8 |
3/4″ |
3/4″ |
0.787″ |
0.669″ |
2.519″ |
1.259″ |
1.220″ |
| S92FF8 |
1″ |
1″ |
0.984″ |
0.826″ |
3.188″ |
1.594″ |
1.574″ |
| S92GF8** |
1-1/4″ |
1-1/4″ |
1.259″ |
0.905″ |
3.661″ |
1.830″ |
1.929″ |
| S92HF8** |
1-1/2″ |
1-1/2″ |
1.574″ |
0.905″ |
4.015″ |
2.007″ |
2.125″ |
| S92IF8** |
2″ |
2″ |
1.968″ |
1.043″ |
4.763″ |
2.381″ |
2.696″ |
**Steel T-Handle
*DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration of valves over 2″ is slightly different.
Reviews
There are no reviews yet.