| Application: | Wherever low or continuous high temperatures or fluid compatibility is a problem, this high quality, high performance hose solves the problem. Also ideal for use where greatly extended service life under “normal” conditions is desired. | SAE Rating: | Meets or exceeds the requirement of SAE J517 100R1 Type AT – EN 853 1SN |
|---|---|---|---|
| Other Ratings: | Meets or exceeds SAE 100 R1AT – EN 853 1SN | Tube: | Black tube, specifically compounded for temperature and chemical resistance, oilresistant. |
| Reinforcement: | One high tensile steel wire braid. | Cover: | Synthetic rubber, blue… weather, oil, fuel, ozone and abrasion-resistant. Smooth up to 5/8″ and wrapped over 5/8″. |
| Service Temperature Range: | -40°F (-40°C) to +300°F (+150°C) constant operation. Maximum Operating Temperature: +300°F (+150°C) |
Air Maximum Temperature: | Through 5/8″ ID: +185°F (+85°C) Above 5/8″ ID: +230°F (+110°C) Note: Operating temperatures in excess of +300°F (+150°C) may materially reduce the life of the hose. |
| Branding: | Alfagomma 1SN Evolution HT … WP … MPa (…PSI) – EN 853 1SN … Q/YR | ||
| Other Features: | |||
|
| Part Number | ID | OD | Max. Working Pressure* |
Min Bend Radius |
Weight | |||
|---|---|---|---|---|---|---|---|---|
| (in.) | (mm) | (in.) | (mm) | PSI | (in.) | (mm) | (lbs./ft.) | |
| TR1HT-04 | 1/4″ | 6.4mm | 0.50″ | 12.7mm | 3250 PSI | 3.9″ | 099.1mm | 0.13 lbs/ft |
| TR1HT-06 | 3/8″ | 9.5mm | 0.65″ | 16.5mm | 2610 PSI | 5.1″ | 129.5mm | 0.20 lbs/ft |
| TR1HT-08 | 1/2″ | 12.7mm | 0.78″ | 19.9mm | 2320 PSI | 7.1″ | 180.3mm | 0.26 lbs/ft |
| TR1HT-10 | 5/8″ | 15.9mm | 0.91″ | 23.0mm | 1900 PSI | 7.9″ | 200.7mm | 0.29 lbs/ft |
| TR1HT-12 | 3/4″ | 19.1mm | 1.06″ | 27.0mm | 1530 PSI | 9.5″ | 241.3mm | 0.37 lbs/ft |
| TR1HT-16 | 1″ | 25.4mm | 1.38″ | 35.0mm | 1280 PSI | 11.8″ | 299.7mm | 0.59 lbs/ft |
| TR1HT-20 | 1-1/4″ | 31.8mm | 1.66″ | 42.1mm | 920 PSI | 16.5″ | 419.1mm | 0.71 lbs/ft |
| TR1HT-24 | 1-1/2″ | 38.1mm | 1.94″ | 49.2mm | 730 PSI | 19.7″ | 500.4mm | 0.90 lbs/ft |
| TR1HT-32 | 2″ | 50.8mm | 2.46″ | 62.4mm | 600 PSI | 24.8″ | 629.9mm | 1.24 lbs/ft |
* Minimum burst pressure 4-to-1 safety factor.






Reviews
There are no reviews yet.