| Construction: |
|
|
| Material: |
- Fitting: Brass
- Cap: Plastic. (Part Numbers Ending in CBC are Brass Caps)
- Washer: 80 Duro Neoprene
|
| Specifications: |
- Temperature Range: -40°F to 150°F
- Pressure Rating: 350 PSI
|
| Safety Notes: |
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
- Swivel is for assembly convenience only, not for live swivel applications.
|
| Installation: |
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
- Disassembly Instructions:
- 1. Leaving push-on fitting in place, make a 1″ cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
|
Brass
Part Number |
Previous
Part Number |
Hose I.D. |
Female NPSM |
| 2800402C |
280-0402 |
1/4″ |
1/8″ |
| 2800404C |
280-0404 |
1/4″ |
1/4″ |
| 2800604C |
280-0604 |
3/8″ |
1/4″ |
| 2800604CBC* |
– |
3/8″ |
1/4″ |
| 2800606C |
280-0606 |
3/8″ |
3/8″ |
| 2800608C |
280-0608 |
3/8″ |
1/2″ |
| 2800808C |
280-0808 |
1/2″ |
1/2″ |
| 2801008C |
280-1008 |
5/8″ |
1/2″ |
| 2801212C |
280-1212 |
3/4″ |
3/4″ |
* Brass cap on CBC parts.
Reviews
There are no reviews yet.