| Features: |
- No flaring, soldering, or other preparation of tubing necessary to assemble.
- Manufactured for connection to low and medium-pressure tubing connection work where excessive vibration or tube movement is not involved.
|
| Approvals: |
- UL listed for flammable liquid
- Compression fittings meet functional requirements of SAE J-512 and ASA
|
| Safety Notes: |
- NOTE: Acetal sleeves and brass inserts allow for standard compression fittings to be used with industrial grades of thermoplastic tubing.
- Not recommended for steel tubing.
- Not recommended for applications using gaseous media.
- Temperature and type of tubing used are important factors in working pressure ranges. Pressure rating given at 73°F (23°C). For thermoplastic tubing, see manufacturers recommendation for pressure range.
- Temperature ranges are given for use with soft metal tubing. For thermoplastic tubing, see manufacturers recommendation for tubing temperature range.
|
| Installation: |
- No flaring, soldering or other preparation of tubing necessary to assemble.
- Slide nut, then sleeve onto tubing. The thread end of the nut must face out.
- Insert tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
- Assemble nut to body, and tighten hand-tight. Then follow the number of appropriate wrench turns for the given size.
|
| Fitting Size |
Tube O.D. |
Tube Wall |
Turns required to seal from hand-tight |
PSI @
73°F (23°C) |
| 60C Series with soft metal tubing |
60PT Series with thermoplastic tubing* |
| 2 |
1/8″ |
.030″ |
1-1/4 |
— |
400 PSI |
| 3 |
3/16″ |
.030″ |
1-1/4 |
— |
400 PSI |
| 4 |
1/4″ |
.030″ |
1-1/4 |
2 |
300 PSI |
| 5 |
5/16″ |
.032″ |
1-1/4 |
2 |
300 PSI |
| 6 |
3/8″ |
.032″ |
2-1/4 |
2 |
200 PSI |
| 8 |
1/2″ |
.032″ |
2-1/4 |
2 |
200 PSI |
| 10 |
5/8″ |
.035″ |
2-1/4 |
2 |
150 PSI |
| 12 |
3/4″ |
.035″ |
2-1/4 |
2 |
100 PSI |
| 14 |
7/8″ |
.035″ |
2-1/4 |
— |
75 PSI |
* Acetal sleeves (60PT) and inserts (63PT) allow for standard compression fittings to be used with industrial grades of thermoplastic tubing.
| Part Number |
Tube O.D. Size |
| 60PT-04 |
1/4″ |
| 60PT-05 |
5/16″ |
| 60PT-06 |
3/8″ |
| 60PT-08 |
1/2″ |
| 60PT-10 |
5/8″ |
Reviews
There are no reviews yet.