| Quality: |
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Handle stops on body to avoid stresses at stem
- Chrome plated brass ball for longer life with rinse hole
|
| Body: |
- Valve length according to DIN 3202 M3 specification
- Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
- Hot forged sand blasted external nickel plated brass body and cap sealed with Loctite® or equivalent threads sealant
|
| Stem: |
- Blowout-proof nickel plated brass stem
- Two FPM O-rings at the stem for maximum safety
|
| Sealing: |
- Pure PTFE self-lubricating seats with flexible-lip design
|
| Threads: |
- EN 10226-1, ISO 228 parallel female by female threads
|
| Flow: |
- Full port to DIN 3357 for maximum flow
|
| Handle: |
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- Handle removable with valve in service
- WARNING: do not exceed reasonable temperature and/or electrical load
|
| Working Pressure & Temperature: |
- 40 Bar (600 PSI) non-shock cold working pressure
- -40°C (-40°F) / +170°C (+350°F)
- For use with dangerous fluids temperature rating is -20°C +60°C and pressure rating is 5 Bar
- WARNING: freezing of the fluid in the installation may severely damage the valve
|
| Upon request: |
- AISI 316 stainless steel ball
- Glass filled PTFE seals
- Custom design
|
| PED Directive: |
- Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by Pascal (1115)
|
| Approved by or in Compliance with: |
- GOST-R (Russia)
- Hygiene and epidemic center in Moscow city (Russia)
- BSI Group (United Kingdom)
- RoHS Compliant (EU)
- DIN-DVGW (Deutschland)
- NOTE: approvals apply to specific configurations/sizes only.
|
|
| Part Number |
Size |
Dimensions (Inches) |
D
(inch) |
DN
(mm) |
I
(mm) |
L
(mm) |
G
(mm) |
A
(mm) |
H
(mm) |
CH
(mm) |
| S84B05 |
1/4″ |
1/4″ |
8mm |
12mm |
50mm |
22.5mm |
82mm |
38mm |
20mm |
| S84C05 |
3/8″ |
3/8″ |
10mm |
12mm |
60mm |
22.5mm |
82mm |
38mm |
20mm |
| S84D05 |
1/2″ |
1/2″ |
15mm |
15.5mm |
75mm |
29.5mm |
100mm |
43mm |
25mm |
| S84E05 |
3/4″ |
3/4″ |
20mm |
17mm |
80mm |
32mm |
120mm |
50mm |
31mm |
| S84F05 |
1″ |
1″ |
25mm |
21mm |
90mm |
40.5mm |
120mm |
54mm |
40mm |
| S84G05 |
1-1/4″ |
1-1/4″ |
32mm |
23mm |
110mm |
46.5mm |
158mm |
73mm |
49mm |
| S84H05 |
1-1/2″ |
1-1/2″ |
40mm |
23mm |
120mm |
51mm |
158mm |
79mm |
54mm |
| S84I05 |
2″ |
2″ |
50mm |
26.5mm |
140mm |
60.5mm |
158mm |
86mm |
68.5mm |
| S84L05 |
2-1/2″ |
2-1/2″ |
– |
– |
– |
– |
– |
– |
– |
| S84M05 |
3″ |
3″ |
– |
– |
– |
– |
– |
– |
– |
| S84N05 |
4″ |
4″ |
– |
– |
– |
– |
– |
– |
– |
*DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Ball valves are marked CE on handle from 1-1/4″ to 2″ as follows:
CE 1115 cat IIIB+D PS: 5 GAS TS1: -20°C TS2: +60°C
Reviews
There are no reviews yet.