| Note: |
- Pressure: Determined by maximum working pressure for hose size.
- CAUTION: Sealing integrity may be damaged by the use of clamps.
- Label Set: FS-500
|
| Material: |
|
|
| Compatible Hose: |
- H100, H101, H201, H332, 35FH
|
| Assembly instructions: |
- To determine the correct length of hose, subtract the cut-off factor for each end Fitting from the overall length of assembly.
- 1. Lubricate insert.
- 2. Hold hose at angle as shown and push on and up over first barb.
- 3. Continue to push straight on until hose is seated under protective plastic cap. (Keep hand back from hose end area so that hose can expand.)
- Assembly Lubricant:
- 1 Gallon: 222070-8
- 1 Pint: 222070
|
| Disassembly instructions: |
- 1. Split hose as shown. Do not cut completely through hose. Sealing edge of barb could be damaged.
- 2. Bend hose and remove with quick pull.
|
| |
Brass
Part Number |
Hose
I.D. |
Tube
Size |
Thread
Size |
A |
Hose Cut-off
Factor |
Hole
Diameter |
Hex
F |
| 10004B-B03 |
1/4″ |
3/16″ |
3/8-24 |
1.39″ |
1.13″ |
0.109″ |
3/8″ |
| 10004B-B04 |
1/4″ |
1/4″ |
7/16-24 |
1.42″ |
1.13″ |
0.172″ |
7/16″ |
| 10004B-B05 |
1/4″ |
5/16″ |
1/2-20 |
1.52″ |
1.19″ |
0.188″ |
1/2″ |
| 10005B-B04 |
5/16″ |
1/4″ |
7/16-24 |
1.81″ |
1.11″ |
0.184″ |
7/16″ |
| 10005B-B06 |
5/16″ |
3/8″ |
5/8-18 |
1.60″ |
1.19″ |
0.234″ |
5/8″ |
| 10006B-B05 |
3/8″ |
5/16″ |
1/2-20 |
1.64″ |
1.19″ |
0.234″ |
1/2″ |
| 10006B-B06 |
3/8″ |
3/8″ |
5/8-18 |
1.70″ |
0.97 |
0.297″ |
5/8″ |
| 10008B-B08 |
1/2″ |
1/2″ |
3/4-18 |
2.24″ |
1.25″ |
0.391″ |
3/4″ |
Note: Drawings may differ from actual parts.
Reviews
There are no reviews yet.