Sale!
12002 by Midland | Inverted Flare Fitting | 3/16 " Male Inverted Flare | 3/8-24 " Thread | Nut | Zinc Chromate Steel

12002 by Midland | Inverted Flare Fitting | 3/16 ” Male Inverted Flare | 3/8-24 ” Thread | Nut | Zinc Chromate Steel

Original price was: $2.25.Current price is: $0.67.

- +
SKU: G_24509_8094835540133 Category: Tag:
Guaranteed Safe Checkout

SPECIFICATIONS

Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating: SAE# 040110 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration: Excellent resistance. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
Advantages: Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Tolerance: +/- .03 on all dimensions.
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73°F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
    • C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″ 7/8″ 1″
Thread OD
(Threads per inch)		 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Standard Metric Threads:
Description
Tube Size		 Thread OD Crest
(Pitch)		 Thread
Description
Japanese 3/16″ 10mm 1.0mm M10 x 1.0
European 3/16″ 10mm 1.0mm M10 x 1.0
GM 6mm 12mm 1.0mm M12 x 1.0
Fuel 5/16″ 14mm 1.5mm M14 x 1.5
Fuel 3/8″ 16mm 1.5mm M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
Crossover Series:
41IFS 41INS 121XXX 2105 411FS 105 41W
Part Number Size Thread A Hex Approx. Weight
(Lbs.)
12001
(12-001)		 1/8″ 5/16-28 0.52″ 0.31″ 0.01
12002
(12-002)		 3/16″ 3/8-24 0.56″ 0.37″ 0.02
12018
(12-018)		 3/16″ 7/16-24 0.56″ 0.43″ 0.02
12003
(12-003)		 1/4″ 7/16-24 0.56″ 0.43″ 0.02
12004
(12-004)		 5/16″ 1/2-20 0.62″ 0.50″ 0.02
12005
(12-005)		 3/8″ 5/8-18 0.66″ 0.62″ 0.03
12000
(12-000)		 7/16″ 11/16-18 0.68″ 0.68″ 0.04
12011
(12-011)		 3/8″ 11/16-18 0.66″ 0.68″ 0.05
12006
(12-006)		 1/2″ 3/4-18 0.74″ 0.75″ 0.08
12007
(12-007)		 5/8″ 7/8-18 0.80″ 0.87″ 0.10
12008
(12-008)		 3/4″ 1-1/16-16 0.88″ 1.06″ 0.10
12083 7/8″ 1-3/16-16 1.07″ 1.19″ 0.14
12084 1″ 1-5/16-16 1.18″ 1.375″ 0.21

Reviews

There are no reviews yet.

Be the first to review “12002 by Midland | Inverted Flare Fitting | 3/16 ” Male Inverted Flare | 3/8-24 ” Thread | Nut | Zinc Chromate Steel”

Your email address will not be published. Required fields are marked *

Related products

Search
Shopping Cart
12002 by Midland | Inverted Flare Fitting | 3/16 " Male Inverted Flare | 3/8-24 " Thread | Nut | Zinc Chromate Steel12002 by Midland | Inverted Flare Fitting | 3/16 ” Male Inverted Flare | 3/8-24 ” Thread | Nut | Zinc Chromate Steel
Original price was: $2.25.Current price is: $0.67.
- +