Sale!
12058 by Midland | Inverted Flare Fitting | 3/16 " Female Inverted Flare x 1/8 " Male NPTF | 90° Elbow | Brass

12058 by Midland | Inverted Flare Fitting | 3/16 ” Female Inverted Flare x 1/8 ” Male NPTF | 90° Elbow | Brass

Original price was: $3.93.Current price is: $1.18.

- +
SKU: G_75882_8094783471781 Category: Tag:
Guaranteed Safe Checkout
Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating: SAE# 040202 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration: Excellent resistance. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
Advantages: Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Tolerance: +/- .03 on all dimensions.
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73°F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
    • C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″ 7/8″ 1″
Thread OD
(Threads per inch)		 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Standard Metric Threads:
Description
Tube Size		 Thread OD Crest
(Pitch)		 Thread
Description
Japanese 3/16″ 10mm 1.0mm M10 x 1.0
European 3/16″ 10mm 1.0mm M10 x 1.0
GM 6mm 12mm 1.0mm M12 x 1.0
Fuel 5/16″ 14mm 1.5mm M14 x 1.5
Fuel 3/8″ 16mm 1.5mm M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
Crossover Series:
491N 491F 400 2400 249IFHD 402 249IF 49W
Part Number Female Inverted Flare x Male NPTF A B Approx. Wt. Lbs.
12057
(12-057)		 1/8″ x 1/8″ 0.26″ 0.59″ 0.03
12058
(12-058)		 3/16″ x 1/8″ 0.26″ 0.61″ 0.03
12059
(12-059)		 1/4″ x 1/8″ 0.33″ 0.65″ 0.04
12054*
(12-054)		 1/4″ x 1/8″ 0.33″ 0.65″ 0.04
12060
(12-060)		 1/4″ x 1/4″ 0.28″ 0.82″ 0.06
12061
(12-061)		 5/16″ x 1/8″ 0.47″ 0.68″ 0.05
12062
(12-062)		 5/16″ x 1/4″ 0.45″ 0.85″ 0.08
12082 5/16″ x 3/8″ 0.47″ 0.86″ 0.12
12063
(12-063)		 3/8″ x 1/8″ 0.54″ 0.76″ 0.14
12064
(12-064)		 3/8″ x 1/4″ 0.53″ 0.92″ 0.14
12065
(12-065)		 3/8″ x 3/8″ 0.50″ 0.94″ 0.12
12114 1/2″ x 1/4″ 0.72″ 1.08″ 0.14
12066
(12-066)		 1/2″ x 3/8″ 0.59″ 1.03″ 0.16
12067
(12-067)		 1/2″ x 1/2″ 0.66″ 1.22″ 0.25
12056
(12-056)		 5/8″ x 3/8″ 0.67″ 1.09″ 0.20
12068
(12-068)		 5/8″ x 1/2″ 0.67″ 1.29″ 0.18
12069
(12-069)		 3/4″ x 1/2″ 0.80″ 1.39″ 0.42
12080
(12-080)		 7/8″ x 3/4″ 0.94″ 1.43″ 0.48
12081
(12-081)		 1″ x 1″ 1.02″ 1.69″ 0.60

* Restricted pipe end .062

Reviews

There are no reviews yet.

Be the first to review “12058 by Midland | Inverted Flare Fitting | 3/16 ” Female Inverted Flare x 1/8 ” Male NPTF | 90° Elbow | Brass”

Your email address will not be published. Required fields are marked *

Related products

Search
Shopping Cart
12058 by Midland | Inverted Flare Fitting | 3/16 " Female Inverted Flare x 1/8 " Male NPTF | 90° Elbow | Brass12058 by Midland | Inverted Flare Fitting | 3/16 ” Female Inverted Flare x 1/8 ” Male NPTF | 90° Elbow | Brass
Original price was: $3.93.Current price is: $1.18.
- +