| Features: |
- Wing nut tightened to 25 in. lbs. torque
- Please note: In sizes 1/2″ through 12″ pipe is known by its nominal inside diameter, which differs from its actual inside diameter. To distinguish pipe sizes from actual measured diameters as used for tube, the terms iron pipe size (IPS) or nominal pipe size (NPS) are usually used. For all pipe sizes, the outside diameter (OD) remains constant; the variations in wall thickness affect the inside diameter (ID).
- Service pressure ratings are based on the following parameters: matching elastomer gaskets and weld ferrules properly aligned and assembled with the clamps tightened to required torques. Tests are done hydrostatically with no water hammer or shock loads.
|
| Part Number |
Pipe Size |
Service Pressure Rating
@ 70 deg. F |
Dimension A |
Weight
(Lbs.) |
| 13MHHV100 |
1″ |
500 PSI |
2.122″ |
0.6400 |
| 13MHHV150 |
1-1/2″ |
450 PSI |
2.654″ |
0.7600 |
| 13MHHV200 |
2″ |
400 PSI |
3.185″ |
0.8840 |
| 13MHHV250 |
2-1/2″ |
350 PSI |
3.717″ |
0.9800 |
| 13MHHV300 |
3″ |
250 PSI |
4.263″ |
1.1400 |
| 13MHHV400 |
4″ |
150 PSI |
5.263″ |
1.3500 |
| 13MHHV600 |
6″ |
100 PSI |
7.500″ |
3.2000 |
* Wing nut tightened to 25 ft. lbs. of torque
Reviews
There are no reviews yet.