| Applications: | Pneumatic instrumentation circuits, lubricant and cooling lines. | Used With: | Aluminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing. |
|---|---|---|---|
| SAE Rating: | N/A | Conformance: | N/A |
| Vibration: | Excellent Resistance. | Temperature Range: | Depends on tubing used. -65°F to +250°F (-53°C to +121°C) with brass sleeve -40°F to +150°F (-40°C to +66°C) with plastic sleeve. (Refer to tubing temperature range.) |
| Tolerance: | +/- .02 on all dimensions. | Lead Free: | Not Lead Free |
- Up to 150 PSI from 0°F to + 150°F with thermoplastic tubing. Up to 300 PSI from 0°F to + 175°F with soft metal tubing.
- 1/8″, 3/16″ O.D. — no limitation
- 1/4″ O.D.–.035 5/16″, 3/8″,1/2″ O.D.–.049
- 1) Cut tubing to desired length.
- 2) Slide nut/sleeve assembly on tube. Threaded end “A” of nut must face toward fitting.
- 3) Bottom tubing into fitting.
- 4) Plastic sleeve – Tighten nut hand tight.
Brass Sleeve – Tighten nut hand tight, then an additional 3/4 turn.
| Tube OD | 1/8″ | 3/16″ | 1/4″ | 5/16″ | 3/8″ | 1/2″ |
|---|---|---|---|---|---|---|
| Thread Size – B | 5/16-24 | 3/8-24 | 3/8-24 | 7/16-24 | 1/2-24 | 11/16-20 |
**Note: 1/8 and 3/16 sizes have brass sleeves**
| Crossover Series: | ||||
|---|---|---|---|---|
| MP61B | 261PFB | 1261B | 61PB | 261UB |
| Part Number | Tube O.D | Thread | A | Hex | Approx. Weight (Lbs.) |
|---|---|---|---|---|---|
| 20227 (20-227) |
1/8″ | 5/16-24 | 0.37″ | 0.37″ | 0.02 |
| 20228 (20-228) |
3/16″ | 3/8-24 | 0.41″ | 0.44″ | 0.02 |
| 20229 (20-229) |
1/4″ | 3/8-24 | 0.34″ | 0.43″ | 0.02 |
| 20230 (20-230) |
5/16″ | 7/16-24 | 0.34″ | 0.50″ | 0.02 |
| 20231 (20-231) |
3/8″ | 1/2-24 | 0.37″ | 0.56″ | 0.04 |
| 20232 (20-232) |
1/2″ | 11/16-20 | 0.42″ | 0.81″ | 0.04 |
Dimension data can change without notice.
Reviews
There are no reviews yet.