| Overview: |
- Danfoss brass tube fittings are made from high quality UNS CA-360 brass bar, and are precision machined to meet SAE standards and specifications.
|
| Applications: |
- Hydraulic brake, power steering, fuel lines and transmission cooler lines.
|
| Advantages: |
- Very low cost and reusable.
- Seats and threads are internal and protected.
- Compact, excellent vibration life.
- Short nut affords very close tube bends.
|
| Used With: |
- Copper, brass, aluminum and steel hydraulic tubing that can be flared.
|
| Pressure: |
- Working pressure up to 2000 psi depending on tube size. Will withstand burst pressure of standard tubing – up to 5000 psi with bundyweld (double flared) and 3500 psi with copper tubing, depending on size.
|
| Temperature Range: |
- -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
|
| Conformance: |
- Ref. SAE No. 040102
- Listed by Underwriter’s Laboratories (available on special order) for fuel equipment, refrigeration and gas.
- Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
|
| Tube OD |
1/8″ |
3/16″ |
1/4″ |
5/16″ |
3/8″ |
7/16″ |
1/2″ |
5/8″ |
3/4″ |
7/8″ |
1″ |
| Thread Size |
5/16-28 |
3/8-24 |
7/16-24 |
1/2-20 |
5/8-18 |
11/16-18 |
3/4-18 |
7/8-18 |
1-1/16-16 |
1-3/16-16 |
1-5/16-16 |
|
| Part Number |
Part Number with Sealant |
Tube O.D. |
Male Pipe Thread |
Hex
C |
D |
L |
| 202X2 |
– |
1/8″ |
1/8″ |
13/32″ |
0.078″ |
0.62″ |
| 202X3 |
202X3Z |
3/16″ |
1/8″ |
15/32″ |
0.125″ |
0.70″ |
| 202X4 |
202X4Z |
1/4″ |
1/8″ |
17/32″ |
0.188″ |
0.74″ |
| 202X4X4 |
– |
1/4″ |
1/4″ |
9/16″ |
0.188″ |
0.89″ |
| 202X5 |
202X5Z |
5/16″ |
1/8″ |
19/32″ |
0.219″ |
0.79″ |
| 202X5X4 |
– |
5/16″ |
1/4″ |
19/32″ |
0.220″ |
0.98″ |
| 202X6X2 |
– |
3/8″ |
1/8″ |
3/4″ |
0.281″ |
0.89″ |
| 202X6 |
202X6Z |
3/8″ |
1/4″ |
3/4″ |
0.281″ |
1.03″ |
| 202X6X6 |
– |
3/8″ |
3/8″ |
3/4″ |
0.281″ |
1.01″ |
| 202X8X4 |
– |
1/2″ |
1/4″ |
29/32″ |
0.406″ |
1.08″ |
| 202X8 |
202X8Z |
1/2″ |
3/8″ |
29/32″ |
0.406″ |
1.07″ |
| 202X8X8 |
– |
1/2″ |
1/2″ |
29/32″ |
0.406″ |
1.26″ |
| 202X10 |
– |
5/8″ |
1/2″ |
1-1/16″ |
0.531″ |
1.32″ |
| 202X12 |
– |
3/4″ |
3/4″ |
1-1/4″ |
0.625″ |
1.39″ |
| 202X14 |
– |
7/8″ |
3/4″ |
1-3/8″ |
0.750″ |
1.38″ |
Pipe end drill may be reduced or increased from seat dimension ‘D’.
Reviews
There are no reviews yet.