| Application: |
Adhesives, Beverage, Chemicals, Deionized Water Transfer,
Fermenter Lines, Food, Hot Fill Lines, Laboratory, Medical,
Resin Feeds, Stirring Vessels, Viscous Material Handling |
Tube: |
Peroxide Cured Silicone |
| Reinforcement: |
Braid Reinforced |
Cover: |
N/A |
| Temperature Range: |
350°F |
Color: |
Natural |
| Opacity: |
Translucent |
Specifications |
Animal-Derived Ingredient Free, BPA Free,
FDA 21 CFR 177.2600, Latex Free, Phthalate Free,
REACH, RoHS, NSF-51 listed for food equipment materials |
| Other Features: |
- Open mesh polyester braiding incorporated within the walls of silicone tubing
- Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces
- Reusable – will withstand repeated sterilization^
- Translucent natural color for visual contact with the flow
- Able to resist extreme temperature variation: -99°F to 350°F
- Odorless, tasteless, and inert
- Excellent weatherability properties – resists U.V., ozone, gases, moisture, and extreme temperatures
- Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing
- Listed by the National Sanitation Foundation (NSF-51) for food equipment materials
- Free of BPA, latex and phthalates; REACH and RoHS compliant
- Made in the USA
|
| Notes: |
- The construction of SILBRADE® enables silicone tubing to handle increased pressure applications. SILBRADE® offers outstanding resistance to temperature extremes and is made from raw materials that meet FDA requirements.
- The flexible design and construction of SILBRADE also allows excellent bend radii and permits installation in restricted spaces without impeding flow.
- SILBRADE®, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods.
- Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures.
- ^SILBRADE® may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced.
- SILBRADE® is not recommended for implantable or in-body uses or for continuous steam applications.
|
| Physical Properties** |
| Hardness, Shore A ±5 – Liner |
70 |
| Hardness, Shore A ±5 – Cover |
60 |
| Tensile Strength, psi |
1460 |
| Elongation at Break, % |
320 |
| Tear Strength, Die B, ppi |
100 |
| Modulus at 100 %, psi |
415 |
| Brittle Temperature, °F |
-99 |
| Max. Operating Temperature, °F |
350 |
**Values listed are typical for the material used in manufacture except where noted, apply to the hose liner except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.
| Part Number |
Inside Diameter
(in.) |
Outside Diameter
(in.) |
Wall Thickness
(in.) |
Length |
Working PSI (at 70°F) |
Color |
| 2900072-100 |
0.125″ (1/8″) |
0.365″ |
0.120″ |
100 ft |
233 PSI |
Natural |
| 2900149-100 |
0.188″ (3/16″) |
0.447″ |
0.130″ |
100 ft |
216 PSI |
Natural |
| 2900226-100 |
0.250″ (1/4″) |
0.520″ |
0.135″ |
100 ft |
208 PSI |
Natural |
| 2900303-100 |
0.313″ (5/16″) |
0.592″ |
0.140″ |
100 ft |
183 PSI |
Natural |
| 2900380-100 |
0.375″ (3/8″) |
0.655″ |
0.140″ |
100 ft |
166 PSI |
Natural |
| 2900457-50 |
0.500″ (1/2″) |
0.800″ |
0.150″ |
50 ft |
141 PSI |
Natural |
| 2900457-100 |
0.500″ (1/2″) |
0.800″ |
0.150″ |
100 ft |
141 PSI |
Natural |
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
The burst pressure can be expected to decrease by at least 20% for each 200°F increase up to 350°F.
Reviews
There are no reviews yet.