SPECIFICATIONS
| Application: | Chemical Transfer, Soap and Detergent Transfer, Analytical Instruments | SAE Rating: | N/A |
|---|---|---|---|
| Other Ratings: | N/A | Tube: | Thermoplastic Elastomer (TPE) |
| Reinforcement: | N/A | Cover: | N/A |
| Temperature Range: | -76 deg. F (-60 deg. C) to 275 deg. F (135 deg. C) | Durometer Hardness (Shore A) 15 sec : |
55 |
| Color: | Translucent | Specifications | N/A |
| Literature: | Versilon™ ReVive 100% Pre-Consumer Recycled Tubing (PDF) | ||
| Other Features: | |||
|
|||
| About: | |||
|
| Part Number | Inside Diameter (in.) |
Outside Diameter (in.) |
Wall Thickness (in.) |
Min. Bend Radius (in.) |
Max. Working Pressure at 73 deg. F (PSI)* |
Vacuum Rating at 73 deg. F (in. Hg) |
Length |
|---|---|---|---|---|---|---|---|
| ATW00003 | 1/16″ | 3/16″ | 1/16″ | 0.25″ | 26 PSI | 29.9 in. Hg | 50ft |
| ATW00007 | 1/8″ | 1/4″ | 1/16″ | 0.25″ | 17 PSI | 29.9 in. Hg | 50ft |
| ATW00012 | 3/16″ | 5/16″ | 1/16″ | 0.50″ | 13 PSI | 29.9 in. Hg | 50ft |
| ATW00017 | 1/4″ | 3/8″ | 1/16″ | 1″ | 9 PSI | 25 in. Hg | 50ft |
| ATW00022 | 5/16″ | 7/16″ | 1/16″ | 1.5″ | 9 PSI | 15 in. Hg | 50ft |
| ATW00027 | 3/8″ | 1/2″ | 1/16″ | 1.5″ | 8 PSI | 15 in. Hg | 50ft |
| ATW00038 | 1/2″ | 3/4″ | 1/8″ | 1.75″ | 10 PSI | 29.9 in. Hg | 50ft |
| ATW00046 | 5/8″ | 7/8″ | 1/8″ | 2.5″ | 8 PSI | 20 in. Hg | 50ft |
| ATW00053 | 3/4″ | 1″ | 1/8″ | 4″ | 6 PSI | 10 in. Hg | 50ft |
*Working Pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.
Unless otherwise noted, all tests were conducted at room temperature 73°F (23°C). Values show were determined on 0.075″ (6,35 mm) thick extruded strip, 1/4″ ID x 3/8″ OD extruded tubing, 0.075″ (6,35 mm) thick molded ASTM plaques or molded ASTM durometer buttons.
Reviews
There are no reviews yet.