| Hose Properties: | |||
|---|---|---|---|
| Application: | High temperature, low pressure oil. Engine fuel systems for diesel and biodiesel use. Low pressure oil applications, including synthetics for transmission oil cooler applications. Qualified with ultra-lowsulfur diesel (ULSD), every blend of biodiesel up to B100, and a variety of synthetic oils |
SAE Ratings: | N/A |
| Other Ratings: | Meets: ASTM D380, ASTM D6751, EN412, EN2240 | Tube: | Eaton Developed HNBR |
| Reinforcement: | Aramid Braid | Cover: | Fiber Braid |
| Operating Parameters: | Up to B20: -40°F to +302°F (-40°C to +150°C) Up to B100: -40°F to +257°F (-40°C to +125°C) Oil Transmission Application: -40°F to 320°F (-40°C to +165°C) |
| Part Number | Hose ID | Hose OD | Max. Operating Pressure | Min. Burst Pressure | Min. Bend Radius | Vacuum service | Weight | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | mm | in | mm | in | bar | psi | bar | psi | mm | in | kPa | in Hg. | kg/m | lbs/ft | |
| GH100-4 | 6 | 6,4mm | 0.25″ | 13,3mm | 0.53″ | 28,0 bar | 400 psi | 112,0 bar | 1600 psi | 31,8mm | 1.25″ | 94,8kPa | 28 in Hg. | 0,12 kg/m | 0.08 lbs/ft |
| GH100-6 | 10 | 9,5mm | 0.38″ | 15,9mm | 0.62″ | 28,0 bar | 400 psi | 112,0 bar | 1600 psi | 38,1mm | 1.50″ | 94,8kPa | 28 in Hg. | 0,15 kg/m | 0.10 lbs/ft |
| GH100-8 | 12 | 12,7mm | 0.50″ | 19,1mm | 0.75″ | 28,0 bar | 400 psi | 112,0 bar | 1600 psi | 50,8mm | 2.00″ | 94,8kPa | 28 in Hg. | 0,19 kg/m | 0.13 lbs/ft |
| GH100-10 | 16 | 15,9mm | 0.63″ | 23,1mm | 0.91″ | 24,0 bar | 350 psi | 96,0 bar | 1400 psi | 63,5mm | 2.50″ | 94,8kPa | 28 in Hg. | 0,27 kg/m | 0.18 lbs/ft |
| GH100-12 | 19 | 19,2mm | 0.75″ | 27,9mm | 1.10″ | 24,0 bar | 350 psi | 96,0 bar | 1200 psi | 76,2mm | 3.00″ | 94,8kPa | 28 in Hg. | 0,30 kg/m | 0.20 lbs/ft |
Bulk / By the Foot: We sell Danfoss hose in “Bulk Length” unless otherwise specified in the title or option selector as “Exact Length”. When you buy “Bulk Length” hose you are agreeing to buy multiple lengths that add up to the length you purchased. If your length can be supplied as a single piece then it will be, but there can be no assurance of this even if you contact us. If you need a single piece then you can select an “Exact Length” option or Contact Us for a quote.
Warning! Danfoss hose and fittings are engineered to match Danfoss Aeroquip hose and fitting tolerances. The use of Danfoss fittings on hose supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Danfoss Corporation, Murdock Industrial Inc., or any other entity. Consult current master catalog for additional warnings and cautions.
Reviews
There are no reviews yet.