| Quality: |
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Handle stops on body to avoid stresses at stem
- Chrome plated brass ball for longer life
|
| Body: |
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
- Side drain allows easy and safe downstream line venting
|
| Stem: |
- Blowout-proof nickel plated brass stem
- Two FPM O-rings at the stem for maximum safety
|
| Sealing: |
- Pure PTFE self-lubricating seats with flexible-lip design
|
| Threads: |
- NPT taper ANSI B.1.20.1 female by female threads
- 1/4″ NPT side tap
|
| Flow: |
- Full port to DIN 3357 for maximum flow
|
| Handle: |
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Handle removable with valve in service
|
| Working Pressure & Temperature: |
- Maximum working pressure 600 PSI (CWP)
- -40°F/+350°F
- WARNING: freezing of the fluid in the installation may severely damage the valve
|
| Upon Request: |
- AISI 316 stainless steel ball and/or stem
- Glass filled PTFE seals
- Custom design
- Dual side drain port
|
| Approved by or in Compliance with: |
- Canadian standards Association (United States, Canada)
- GOST-R (Russia)
- Hygiene and epidemic center in Moscow city (Russia)
- RoHS Complaint (Russia)
- Underwriters Laboratories (United States & Canada)
- NOTE: approvals apply to specific configurations/sizes only.
|
|
| Part Number |
Size |
Dimensions (Inches) |
| D |
DN |
I |
L |
G |
M |
CH |
| S82D45 |
1/2″ |
1/2″ |
0.590″ |
0.610″ |
2.559″ |
1.397″ |
0.964″ |
0.984″ |
| S82E45 |
3/4″ |
3/4″ |
0.787″ |
0.669″ |
2.736″ |
1.476″ |
1.063″ |
1.220″ |
| S82F45 |
1″ |
1″ |
0.984″ |
0.826″ |
3.405″ |
1.811″ |
1.200″ |
1.574″ |
| S82G45 |
1-1/4″ |
1-1/4″ |
1.259″ |
0.905″ |
3.878″ |
2.047″ |
1.338″ |
1.929″ |
| S82H45 |
1-1/2″ |
1-1/2″ |
1.574″ |
0.905″ |
4.232″ |
2.224″ |
1.516″ |
2.125″ |
| S82I45 |
2″ |
2″ |
1.968″ |
1.043″ |
4.960″ |
2.578″ |
1.752″ |
2.696″ |
*DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Reviews
There are no reviews yet.