| Quality: |
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Chrome plated brass ball for longer life
- Handle stops on body to avoid stresses at stem
|
| Body: |
- Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
|
| Stem: |
- Blowout-proof nickel plated brass stem
- Two FPM O-rings at the stem for maximum safety
|
| Sealing: |
- Pure PTFE self-lubricating seats with flexible-lip design
|
| Threads: |
- NPT taper ANSI B.1.20.1 female by female threads
|
| Flow: |
- Full port to DIN 3357 for maximum flow
|
| Handle: |
- PVC dip coating. Handle coating offers both thermal and electrical protection
- WARNING: do not exceed reasonable temperature and/or electrical load
- Handle removable with valve in service
|
| Working Pressure & Temperature: |
- 600 PSI (CWP) up thru and including 2″
- -40°F/+350°F
- WARNING: freezing of the fluid in the installation may severely damage the valve
|
| Upon Request: |
- AISI 316 stainless steel ball
- Glass filled PTFE seals
- Custom design
- Special configuration for industrial oxygen application
|
| Approved by or in Compliance with: |
- Canadian standards Association (United States, Canada)
- Factory Mutual (United States)
- GOST-R (Russia)
- Hygiene and epidemic center in Moscow city (Russia)
- TSSA (Canada)
- RoHS Compliant (EU)
- Underwriters Laboratories (United States & Canada)
- Meeting WW-V-35C Federal U.S. Specification
- NOTE: approvals apply to specific configurations/sizes only.
|
|
| Part Number |
Size |
Dimensions (Inches) |
| D |
DN |
I |
L |
G |
CH |
| S95B41E |
1/4″ |
1/4″ |
0.314″ |
0.472″ |
1.771″ |
0.885″ |
0.787″ |
| S95C41E |
3/8″ |
3/8″ |
0.393″ |
0.472″ |
1.771″ |
0.885″ |
0.787″ |
| S95D41E |
1/2″ |
1/2″ |
0.590″ |
0.610″ |
2.332″ |
1.161″ |
0.984″ |
| S95E41E |
3/4″ |
3/4″ |
0.787″ |
0.669″ |
2.519″ |
1.259″ |
1.220″ |
| S95F41E |
1″ |
1″ |
0.984″ |
0.826″ |
3.188″ |
1.594″ |
1.574″ |
| S95G41E |
1-1/4″ |
1-1/4″ |
1.259″ |
0.905″ |
3.661″ |
1.830″ |
1.929″ |
| S95H41E |
1-1/2″ |
1-1/2″ |
1.574″ |
0.905″ |
4.015″ |
2.007″ |
2.125″ |
| S95I41E |
2″ |
2″ |
1.968″ |
1.043″ |
4.763″ |
2.381″ |
2.696″ |
*DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4. Stem configuration of valves over 2″ is slightly different.
Reviews
There are no reviews yet.