| Overview: |
- There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron.
- HOSE ENDS are sleeve type couplings that fit over the OD of the sandblast hose. They are secured to the hose with wood screws. Countersunk holes on the hose end ensure that the screws fit correctly and will not be snagged while the hose is in operation. Within the ID of the hose end is a corkscrew ridge that helps to twist the coupling onto the hose and more importantly, helps to minimize the force of blow-back. Hose-to-hose or hose-to-pot connections are made by the 2 lug crowfoot design. No matter what the hose size, the 2 log hose ends interchange for common connections.
|
| Other Components: |
- For other components please see: Sandblast Hose Couplings
|
| Safety Warnings: |
- Please do not mix Jason Industrial couplings with other products.
|
| Aluminum Part Number |
Brass Part Number |
Hose ID |
Hose OD |
| Q1A |
Q1B |
3/4″ |
1-1/2″ |
| Q2A |
Q2B |
1″ |
1-7/8″ |
| Q3A |
Q3B |
1-1/4″ |
2-5/32″ |
| Q4A |
Q4B |
1-1/2″ |
2-3/8″ |
| Replacement Gasket |
| QW |
Replacement Gasket for Metal Hose End/Pot End. One Size Fits All |
Jason Industrial Inc. disclaims any liability for use of their products in applications other than which they are designed.
Reviews
There are no reviews yet.